Unimat DB 200 or SL 1000 Urethane HT Blue Drive Belts. Slow Speed Standard Set of five (5) Belts as shown.
Our Belts are NOT Black Buna "O" Rings or homemade Orange belts, these are factory made, professionally welded, lifetime belt warranty HT Blue Urethane Power Transmission Belting we have custom made for the Unimat.
Normally for the Standard Slow Speed Set you would receive a set of three (3) belts, 2 of which they only include two of the same size, Motor to Idler and then Idler to Idler, these are not the same size, measure the distance.
I address some belting problems many of my customers have asked me about, we make this Standard Slow Speed Set a set of five (5) belts to fit ALL Possible Belt Configurations. The two extra belts are for the high speeds shown in pictures 3 & 4 and I also have a belt for Motor to Idler and another size for Idler to Idler. Nobody else addresses this problem and other sets will not do every possible belt configuration as ours will do with the proper belt tension. These two last pictures are without the Slow Speed Bracket but the same configurations apply.
Urethane Drive Belts are far superior to Buna O- Rings in terms of Grab, Wear and Life but there is also a stretch difference, this means that one Urethane Drive Belt will not do what one Buna O-ring can do. Buna Rubber will stretch easier than Urethane (this is not a good thing when it comes to belting) so a Rubber belt will cover a much larger range of sizes than a Urethane Belt will.
Our belts have been custom made for every size configuration allowing for a 20% stretch of every belt. Nobody else offers this and this is why we include more belts than anybody else, not just identical sets, others sell multiple sets because they know their belts will not last very long. Ours have a lifetime belt warranty no questions asked.
Yes others sell Urethane but not Factory Welded HT Blue, our belts have a 20% stretch factor where other Urethane sets have less than 10% so there welds don't break, more stretch, better grab.
The material used, Urethane HT Blue, is far superior to any other material used for belting and our welds are professionally done on a Power Transmission Belt Welding Machine at the factory for a perfectly aligned, 100% penetration weld. These welds are what allow this material to be strong enough for this 20% stretch factor; no other weld can even come close.
I have many other belts available like the Power Feed, Power Feed with Raising Block, Slow Speed Set and so on. You can just contact me to add to this order or just look at my other listings for the exact set you need.